» » » » Windows 7 installation how-to, step by step, Chapter I.

By: Hugo Repetto Posted date: January 19, 2010 Comments: 1

If you're ready to take Microsoft's new OS for a spin, this guide can helpPerforming a New Installation of Windows 7

The three basic types of clean installation procedures are as follows:

• Install on a brand new disk or computer system

• Erase the disk, format it, and install

• Install into a new directory for dual-booting (see the multiboot discussion later)

If you intend to use either of the first two methods, be sure your computer can boot from a DVD (most newer computers support booting from a DVD drive). Doing so might require changing the drive boot order in the BIOS or CMOS, but try it first as-is. With no floppy disk inserted and a clean hard disk, try the DVD drive next. The Windows 7 DVD is bootable and should run the Setup program automatically.



Installation takes 15 to 30 minutes, depending on the speed of your machine. Refer to the following sections if you have questions about any steps in this process.

Note: Windows 7 automatically applies the NTFS format to any disk partition upon which it is installed during a clean installation.

Typical Clean Setup Procedure

If you're installing into an empty partition and you can boot an operating system that is supported for the purpose of Setup (Windows Vista or XP), just boot up, insert the DVD and choose Install Now from the resulting dialog box. Then you can follow the installation step-by-step procedure.
If Windows doesn't detect the DVD automatically upon insertion, youmust run the Setup program, setup.exe, from the Start, Run dialog box(after opening the Run dialog box, type D:/setup.exe; on Vista use theStart menu Search box instead [using the corect letter for your DVDdrive if it isn't D]). The setup.exe application is located in theSources directory on the DVD. After the Setup routine starts, you canfollow the installation procedure step by step.

If your computer has a blank hard disk or your current OS isn't supported, this process changes. You must launch the installation process from the Windows 7 DVD (this works only if you can boot from the DVD drive). Setup automatically runs if you boot from the DVD.

Yet another setup method involves the network. To initiate a network installation, you must create a network share of the distribution DVDor a copy of the DVD on a hard drive. The destination system must havenetwork access, and the user account must have at least read access tothe installation files. Initiate Setup by executing setup.exe from the network share. For example, from the Start, Run command, or the Vista

Start menu Search box, type this path: \\\\sources\Setup. Setup recognizes an over-the-network
installation and automatically copies all files from the network share
to the local system before the first reboot.



Tip: All versions of Windows 7, 32- or 64-bit, are included
on the same DVD. The product key that you enter during setup determines which actual version of Windows 7 you end up with after the installation completes. Keep your Windows 7 DVD and product key in a safe location after you've performed your installation. It's useful for repairs of all kinds.


Windows 7 installation screen
Installing Windows 7 from an existing Windows installation.
Clean Install from DVD, Step by Step
A typical clean installation (on a blank hard disk) step-by-step procedure is as follows:
1. Insert the Windows 7 DVD into your computer's DVD-ROM drive, and restart the computer. Windows 7 Setup should start automatically. If Setup does not start automatically, ensure that your computer is configured to boot from the DVD drive.

2. You are asked to select regional options for the Windows 7 installation. Make your selections and click Next to continue.

3. In the next dialog box, you are prompted to start the installation. Click Install Now to begin the installation. This produces a screen that tells you that Setup is starting.

4. In the Software License Terms dialog box, ensure that you read and understand the End User Licensing Agreement (EULA). When you're ready, select the I Accept the License Terms option and click Next to continue.

5. In the Which Type of Installation Do You Want? dialog box, shown in Figure 2.10, you can select only the Custom (Advanced) option because you're performing a new installation on a blank hard disk. Click Custom (Advanced) to continue.

6. In the Where Do You Want to Install Windows? dialog box, select the partition onto which you'll install Windows 7. When you're ready to proceed, click Next. If you need to provide a RAID or SCSI driver, now is the time to do it.

7. The Installing Windows dialog box appears and gives you an updated status of the upgrade process.

8. After some time, your computer restarts and the newly installed Windows 7 loads. Windows 7 resumes the installation process. Before the restart, a warning appears.

9. After the restart, you'll see a notification telling you that Windows 7 is preparing the new installation. Windows 7 moves back into a graphical display after a few minutes and tells you it's updating Registry settings and starting services, after which it lets you know it's completing the installation.

10. After completing the installation, Windows 7 asks you to provide a username and a computer name. After providing this information, click Next to continue.

Note: Always choose a computer name that is unique. It must differ from any other computer, workgroup, or domain names on the network. You'll probably want to enter your name or a name of your own choice, although Setup supplies a recommendation. You might want to coordinate naming your computer with your LAN administrator, if you have one.


Windows 7 installation options
Figure 2.10: For new installations, only the Custom (Advanced) option is available.


11. In the next dialog box, you are asked to supply a password for your user account (which you must reenter as a double-check) and a password hint to help you remember that string. After making your selections, click Next to continue.

12. In the Type Your Windows Product Key dialog box, enter the product key that came with your Windows 7 DVD. I recommend that you leave the Automatically Activate Windows When I'm Online option checked to take care of Windows Product Activation within the three days after the Windows 7 installation. After entering this information, click Next to continue.
You can also leave the Product Key box blank. If you do this, you'll be asked which version of Windows 7 you want to install, and you can select any version from Starter to Ultimate. You'll have to provide a valid product key, however, within 30 days for whatever version you install or else Windows 7 will nag you regularly and often about registration. (If you install a slip-streamed copy of Windows 7 Service Pack 1, or use the Windows Update service to upgrade to SP-1, you'll be reminded to register rather than receiving constant nags.)
You can use the no-key method to play around with different versions of Windows 7, but be careful if you select a version for which you don't have a key; you must perform a clean install every time you reinstall Windows 7, and you must eventually install a version for which you have a license, or erase it. You'll lose your applications and data every time you reinstall.
Caution: You should definitely not play with alternate versions if you are upgrading from an older version of Windows. After the first such install, there's no way to go back and repeat the upgrade with your licensed version of Windows 7.

13. In the Help Protect Your Computer and Improve Windows Automatically dialog box, you configure the base security for Windows 7. In most cases, you should select Use Recommended Settings. To make your selection, click it.

14. In the Review Your Time and Date Settings dialog box, select your time zone, daylight savings option, and current date options. Click Finish to complete the upgrade process.
15. In the Select Your Computer's Current Location dialog box, shown in Figure 2.17, tell Windows where you'll be using your computer. As with Windows Vista, Windows 7 configures your network adapters for DHCP and does not ask you what to do.

16. Windows prompts you one last time-after you click Start, you're finished with the installation.

17. After a few more minutes, you are finally presented with your brand new Windows 7 login screen, as shown in Figure 2.18. Congratulations, you've completed the installation of Windows 7!
Tip: If you plan to perform a clean installation on your computer that is currently running some earlier Windows version, be sure to get your data and other files off the computer beforehand. You can perform this process manually, or you can opt to use Windows Easy Transfer to automatically copy all your files and settings to an external hard drive or network location. After the clean installation of Windows 7 has completed, you can run Windows Easy Transfer again to reload your files and settings on the new installation of Windows 7.

Windows 7 location setup
 The different location choices correspond to different levels of security on your Windows 7 computer.


Windows 7 log-inscreen
The Windows 7 login screen is much different than previous versions.

source: ComputerWorld



Download Windows 7 Themes


If you liked this article, subscribe to the feed by clicking the image below to keep informed about new contents of the blog:



Do you consider this article interesting? Share it on your network of Twitter contacts, on your Facebook wall or simply press "+1" to suggest this result in searches in Google, Linkedin, Instagram or Pinterest. Spreading content that you find relevant helps this blog to grow. Thank you!

stampa la pagina
«
Next
Newer Post
»
Previous
Older Post

1 commenti:

  1. You really did a great job by describing all the points carefully. Thanks for sharing with us.
    Windows 7 to 10 Migration
    SCCM Migrations

    ReplyDelete

Do not insert clickable links or your comment will be deleted. Checkbox Send me notifications to be notified of new comments via email.

My Favorites in Instagram

Catan, Games, Windows 10 Office 2013, Windows, Microsoft Windows 8, Keyboard, Microsoft Windows Phone 8, Microsoft, Mobile windows 7, apps, Microsoft Windows 10, Microsoft, Upgrade Windows Store, Apps, Microsoft Avidemux, Musica, Multimedia Windows, Silverlight, Microsoft Windows 7, Migration, Windows Vista

Recent Posts

Find Us On Pinterest

Labels

Find Us On Facebook

Popular Posts

Archive

My Ping in TotalPing.com follow us in feedly

Random Posts